HEPA Pro 4 Gallon Certified HEPA Vacuum | Mold, Lead Paint & Asbestos Cleanup Dust Extractor

NEW GENERATION
HEPAPRO 4G
POWERFUL. COMPACT. OSHA SILICA DUST COMPLIANT.

The HEPA PRO 4G is a compact, high-performance HEPA vacuum designed for hazardous dust recovery, silica dust extraction, and critical containment environments.


150 CFM Airflow	100" H20 Water Lift	4 Gallon Recovery Tank	2-Stage 99.97% HEPA Filtration @ 0.3 Micron Capture Rate	60 dB Quiet Operation

TOP VACUUM BENEFITS
	OSHA Silica Dust Compliant
	EPA Lead Paint (RRP) Compliant
	Asbestos, Mold & Bacteria Recovery
	Powerful Suction in a Compact Size
	Certified HEPA Containment
	Retractable 20' Power Cord
	Built for HD Construction Demands

JOBSITE APPLICATIONS for the HEPAPRO 4G VACUUM

HEPA PRO - Certified & Compliant

CERTIFIED FOR
	Asbestos Abatement
	Mold & Lead Paint Remediation
	Tuckpointing & Masonry
	Concrete & Stone Grinding and Sawing
	Disaster Restoration
	Industrial Cleaning

Vacuum anything including ultra-fine powder, creosote, bacteria, hot mastic, lead paint, mold, etc. without blinding the filter or compromising its life!.

TUCKPOINTING DUST EXTRACTION

ASBESTOS ABATEMENT CONTAINMENT

MOLD REMEDIATION & LEAD PAINT RESTORATION

95+% Dust Control + Complete Blade Visibility.

Masonry restoration contractors must control respirable crystalline silica dust produced by mortar grinding. When connected to a dust control guard and angle grinder, the HEPAPro 4G captures dust at the source, helping you stay compliant with OSHA silica dust regulations.

Asbestos abatement contractors require certified HEPA vacuum capable of safety capturing microscopic asbestos fibers. The HEPAPro 4G features a 2-stage HEPA filtration system capturing 99.97% of particles at 0.3 microns, preventing hazardous fibers from escaping.

Restoration contractors rely on vacuums during mold, lead paint remediation, and water damage restoration to safety capture mold spores, bacteria, and contaminated debris. The HEPAPro 4G provides the containment needed for environmental renovations and restoration jobs.

Common Applications

COMPACT. PORTABLE. TOUGH.

16" x 12" x 18 lbs.

Easy to Transport and
Maneuver on Any Jobsite

Brick mortar grinding
Masonry restoration and repair
Historic building restoration
Chimney repair and repointing.

Pipe insulation removal
Floor tile and mastic removal
Ceiling and wall material containment
Environmental remediation cleanup.

Mold remediation cleanup
Water damage restoration
Bacteria and biohazard cleanup
Disaster restoration projects.

POWERFUL PERFORMANCE. MAXIMUM PROTECTION

150 CFM AIRFLOW High airflow for superior dust capture with power tools and grinders.	100" WATERLIFT Powerful suction for heavy debris and fine hazardous dust extraction.	2-STAGE HEPA FILTRATION Fail-safe HEPA system captures 99.97% of particles at 0.3 microns for maximum safety.	4 GALLON CAPACITY Compact but large collection capacity tank for longer run time between emptying.	60 dB QUITE OPERATION One of the quietest vacuums in its class for a better working environment. Ideal for hospitals, schools, residential work and public environments.

Technical Specifications

Included Accessories

More Power.
Better Performance.

Motor	1.7 HP
Voltage	120V / 60Hz
Airflow	150 CFM
Waterlift	100"
Power Cord	25 ft
Noise Level	60 dB
Filtration	2-Stage HEPA
Tank Capacity	4-Gallon Stainless Steel
Hose	1-1/4" x 6'

FEATURE	HEPA PRO 4G	NILFISK GC930
Airflow	150 CFM	67 CFM
Waterlift	100"	89"
Motor Power	1200 Watts	1000 Watts
Noise Level	60 dB	57 dB
Tank Capacity	4 Gallon Stainless Steel	4 Gallon ?
Weight	18 lbs.	16.5 lbs.

CERTIFIED HEPA VACUUM
FOR OSHA SILICA DUST CONTROL

Protect Your Workers

Protect Your Business

Stay OSHA Compliant

Why OSHA Silica Dust Control Matters

OSHA's Slica Dust Rule (29 CFR 1926.1153) requires employers to limit worker exposure to respirable crystalline silica - a toxic dust found in concrete, mortar, brick, block and stone. Exposure can cause silicosis, lung cancer, COPD and other serious respiratory diseases.

Dust extraction at the source using a certified HEPA vacuum is one of the most effective ways to control silica dust. The HEPA Pro 4G is engineered specifically for this purpose.

The HEPA Pro 4G captures 99.97% of particles down to 0.3 microns, preventing dangerous dust from becoming airborne and keeping your jobsite safer, cleaner and compliant.

Whether you're grinding concrete floors, cutting masonry or tuckpointing, this vacuum delivers the power, filtration and reliability professional contractors demand.

Certified HEPA Vacuum for OSHA Silica Dust Control

OSHA Silica Dust - Jobsite The OSHA Silica Dust Rule (29 CFR 1926.1153) requires employers to limit worker exposure to respirable crystalline dust - a toxic dust found in concrete, mortar, brick, block and stone. Exposure can cause silicosis, lung cancer, COPD and other serious respiratory diseases.

The most effective way to control silica dust is to capture it at the source before it becomes airborne. Using a dust shroud connected to a certified HEPA vacuum dust extractor prevents hazardous dust from becoming airborne and helps keep your jobsite, crew and building occupants safe.

The HEPA Pro 4G is purpose-built as a small, compact dust extractor for use on scaffold with dust control saws and grinders. With powerful 125 CFM airflow and 100" waterlift, it delivers exceptional dust capture performance.

Its 2-Stage Fail-Safe Filtration System with a certified HEPA filter captures 99.97% of particles down to 0.3 microns, helping you stay compliant with OSHA silica dust regulations while protecting your health and your business.

This makes the HEPA Pro 4G an ideal dust extraction solution for contractors working in:

concrete grinding and polishing
masonry restoration
tuckpointing and mortar removal
lead paint removal projects
general construction dust control.

Use the HEPA Pro 4G as part of a complete dust control system and work with confidence---every time.

PROTECT YOUR CREW
Reduce exposure to hazardous silica dust.

STAY OSHA COMPLIANT
Control dust at the source and meet silica regulations

CLEANER JOBSITES
Less airborne dust means safer, cleaner environments.

PROFESSIONAL RESULTS
Better visibility, less clean-up and more satisfied clients.

CONTRACTOR QUESTIONS ABOUT OSHA SILICA DUST VACUUMS
	Do I need a HEPA vacuum for silica dust? Yes. OSHA silica dust regulations require contractors to control respirable crystalline silica when cutting, grinding, drilling or tuckpointing concrete and masonry. The most effective methods is capturing dust at the source using a dust shroud connected to a certified HEPA vacuum dust extractor. HEPA filtration captures 99.97% of particles down to 0.3 microns, helping prevent hazardous dust from becoming airborne.
	What vacuum is OSHA compliant for concrete grinding? OSHA does not approve specific vacuums but requires contractors to use dust collection systems that effectively capture silica dust. Vacuums designed for concrete grinding typically use high airflow, strong suction and HEPA filtration. When connected to a grinder with a dust shroud, a certified HEPA vacuum such as the HEPA Pro 4G can be used as part of an OSHA-compliant silica dust control system.
	What is a certified HEPA vacuum? A certified HEPA vacuum is a vacuum system that has been tested to ensure the entire vacuum meets HEPA filtration standards, not just the filter. The HEPA filter captures 99.97% of particles down to 0.3 microns, which includes extremely fine hazardous dust such as silica dust, lead paint particles and mold spores.
	Can a HEPA vacuum be used for lead paint removal? Yes. Certified HEPA vacuums are commonly used during EPA Lead Paint Renovation, Repair and Painting (RRP) projects. HEPA filtration captures extremely fine lead dust generated when sanding, grinding or removing old paint coatings, helping keep your crew and the environment safe.
	What tools require silica dust control? OSHA silica dust regulations apply to many common construction tools, including: concrete grinders, masonry saws, tuckpointing grinders, hammer drills, rotary hammers, demolition hammers, and concrete cutting saws. Using a dust shroud and HEPA vacuum dust extractors help control dust at the source.