3M 2097
P100 Filter - with Nuisance level Organic Vapor & Acid Gas Relief

• Exceptional 99.97% filter efficiency
• Meets NIOSH P100-series test criteria
• Versatile protection against many oil and non-oil based particulate contaminants
• Nuisance odor relief for organic vapor levels below the Permissible Exposure Level (PEL).

Fits the following
3M Respirators

6000 Half Face	6000 Full Face

Description / Features

• Comfort - 3M’s advanced filter media provides a lightweight, easy breathing combination not found in fiberglass containing filters

• Versatile protection - 2097 is well suited for a wide range of oil and non-oil based particulate contaminants and can be used as a prefilter for certain chemical exposures

• Simplicity - filter's versatility reduces your inventory and training requirements

• Compatibility - 2097 can be used with 3M’s wide variety of half and full face piece designs

• Exceptional filter efficiency - passes NIOSH’s P-series test criteria

• 2097 P100 filter provides a minimum 99.97% filter efficiency

• Durability - unique flexible filter material resists abrasion and wetting. Filters are flame and water resistant

• Use For:

  • Solids such as those from processing minerals, coal, iron ore, cotton, flour and certain other substances

  • Liquid or oil based particles from sprays that do not also emit harmful vapors

  • Metal fumes produced from welding, brazing, cutting and other operations involving heating of metals

  • Radioactive particulate materials such as uranium and plutonium

  • Asbestos

  • Relief from nuisance levels of organic vapors* below the OSHA PEL or applicable government standards, whichever is lower

  • 3M recommended for ozone protection up to 10 times the OSHA PEL.** 

• Do Not Use For:

  • Gases and vapors above the OSHA PEL, including those present in paint spraying operations, unless combined with approved chemical cartridges

  • Sandblasting

  • Oxygen deficient atmospheres

  • Aerosol concentrations that exceed:  10 times the permissible exposure limit (PEL) with half face piece, or 10 times the PEL with full face piece qualitatively fit tested or 50 times the PEL with full face piece quantitatively fit tested or applicable government regulations, whichever is lower.