Carbide Nugget Blade - Joint Sealant & Fire Fighter Rescue Blade

RCA CARBIDE NUGGET BLADE
Aggressive Cutting Through a Variety Materials --- at the same time.

Cuts Through Difficult Materials that Diamond & Abrasive Blades Can't :

Expansion joint filler: felt, paper, foam, rubber
Compressed dirt & debris
Hard to semi-hard joint sealant - caulk, epoxy
Rubber tires, wood, roots, railroad ties etc.

Additional Applications - Cuts Through:
A

Tar & Gravel Roofs	Joint Sealant	Drywall	Auto Body Parts
Tree Roots	Cardboard	Tires	Felt Expansion Joint
Wood Pallets	Metal Studs	Plastic	Shingles
Fire Doors	Railroad Ties	Etc.	? ? ?


Carbide Nugget Cutting Edge	Handles Tough & Compressed Materials	Reverse Rotation Sharpening (see details)*	Sizes from 5" - 16"

* Incredible Life, Self-Sharpening:
During the cutting process, the carbide nuggets are not dislodged from the matrix like conventional abrasives. Instead, they simply dull and lose their sharp edges, the blade is then re-sharpened by reversing the rotation direction of the blade.

Carbide nuggets fused to the steel core for aggressive cutting performance.

The Contractor's Solution

The RCA Carbide Nugget Blade is design for contractors who need an aggressive cutting edge to remove hard joint sealants and other difficult materials. The carbide nuggets provide the durability and cutting power needed for demanding restoration and demolition applications.

	Cuts hard sealants and caulk.
	Handles compressed fillers, epoxy, foam felt, paper and rubber.
	Built for aggressive, long-lasting performance.
	Available in sizes from 4" to 16" with multiple arbor options.

Blade Specifications
Diameter:	5" --- 16"
Thickness:	.250 (all diameters)
Arbor:	7/8", 1" or 20mm (varies by size)
Segment Height:	.250 (approx.)
Cutting Type:	Carbide nugget segments
Application:	Joint sealant and compressed material removal, demolition and more.
Compatible Saws
Designed for use with 14" walk-behind saws and handheld saws and angle grinders. Verify compatibility with your saw model and arbor requirements.

Available Sizes & Ordering Information

	Safety & Operating Considerations
		Personal protective equipment and face protection are mandatory.
		Use only on approved saws and at recommended operating speeds..
		Follow the manufacturer's instructions for reversing rotation (if applicable.)
		Maintain proper guarding and use correct flange nuts.
		Do not exceed the blades rated speed or use on inappropriate materials..

Aggressive cutting action. Follow all safety guidelines and manufacturer recommendations.

Part Number	Size	Arbor	Price	Order
CN0525P	5"	7/8"	$92.00
CN0725P	7"	7/8"	$140.00
CN1025P	10"	7/8"	$225.00
CN1225P	12"	1"	$245.00
CN1225PMM	12"	20mm	$245.00
CN1425P	14"	1"	$279.00
CN1425PMM	14"	20mm	$279.00
CN1625P	16"	1"	$340.00